• noImage

    Characteristics

    Conforming to MIL-PRF-83363 requirements, the outstanding characteristics of this grease are its operating temperature range (-65ºF to 350ºF), its extreme pressure and anti-wear properties, and its ability to function in heavily loaded gear boxes and transmissions without excessive heat buildup of temperature. This grease was developed for lubricating helicopter transmissions, screw actuators, fine pitch gear trains and servo mechanisms. It is also used in aircraft windshield wiper motor gearboxes. Cost effective industrial uses for this lubricant are increasing rapidly as indicated by the following partial list of applications.

    Applications

    Stepping motor drive - excellent adherence and lubricity coupled with long life eliminating severe maintenance problems in a large telescope drive mechanism.

    Missile guidance controls - long shelf life, high lubricity, and seal compatibility.

    Ball screw actuators - required high lubricity, high load capability, seal compatibility, and low start run torques at -65 ºF.

  • noImage

    Characteristics

    Conforming to MIL-PRF-83261 requirements, the outstanding qualities of Tribolube-2N is its wide operating temperature range, extreme pressure and anti-wear characteristics, non-migratory nature, low foreign and/or opaque particle content, high resistance to microwave energy, and its compatibility with plastic and elastomeric seals. Tribolube-2NMS maintains the same physical properties as Tribolube-2N but is specially formulated with MoS2 to enhance its already excellent extreme pressure and anti-wear properties. Tribolube-2NWS maintains the same physical properties as Tribolube-2N but is specially formulated with a special extreme pressure additive to enhance its already excellent extreme pressure and anti-wear properties.

    Applications

    Aircraft actuators, gears, gimbal rings, oscillation bearings, antifriction and plain spherical bearings. It is especially suitable for use in applications using miniature bearings. Blower motors, motor generators, plastic clutches and gears, servo motors, microwave ovens, speedometer cables, motorcycle and automotive distributors, typewriters, business machines, etc. Other applications include subfractional horsepower gear motors, camera drive systems, microswitch assemblies, reduction gears, and scientific instruments.

  • noImage

    Characteristics

    This is an excellent grease with a wide temperature range, high load carrying capacity, and extremely good lubrication properties at very high loads. Inhibited against oxidation and corrosion, it has an operating temperature range -65 ºF to 350 ºF. Note that the Steel-on-Steel wear data are reported with a 75 kg load, rather that the standard 40 kg load.

    Applications

    This grease was especially designed for heavily loaded sliding applications in aircraft gun mount shoulder bearing, gun mount bases and in mating yokes, and is highly recommended for use in many heavily loaded sliding applications at high or low temperatures.

  • noImage

    Characteristics

    This special purpose grease containing over 20 % molybdenum disulfide was designed for use in the very heavily loaded swing wing pivot bearings in the F-111 aircraft. Tribolube-5 no longer conforms to the FMS-1071 specifications.

    Applications

    This grease was especially designed for heavily loaded journal and plain spherical bearings. It is also recommended for use in heavily loaded sliding applications at high or low temperatures. It has provided exceptional service in bucket loader pivot pins, greatly extending pin life.

  • noImage

    Characteristics

    Tribolube-11 is a PAO clay thickened multipurpose synthetic grease which has very low start/run torque properties at -100 ºF, it was designed to meet the requirements of mil-spec MIL-G-21164. The Mil-Spec has changed & Tribolube-11 no longer conforms or meets the requirements. It provides excellent anti-wear and high-load carrying capacity. It also has excellent antiseize properties. Molybdenum disulfide solid lubricant is used in this grease to enhance the extreme pressure properties and help absorb shock loads.

    Applications

    Tribolube-11 is appropriate for use in heavily loaded sliding steel surfaces such as turbine engine accessory splines, and highly loaded antifriction bearings where a grease containing molybdenum disulfide is required.

  • noImage

    Characteristics

    These greases are especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Each grease is suited for different operating environment temperatures. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions. The Tribolube-14 series is available with three different corrosion inhibitors designated by the letters RPA, RPB, & RPC. Please consult with an ALI lubrication engineer to select the correct one for your application.

    Applications

    These greases are suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    These greases are especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Each grease is suited for different operating environment temperatures. Tribolube-15 and Tribolube-15MS meet the requirements for MIL-PRF-27617 Types 4 & 5. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.

    Applications

    Tribolube-15V is recommended for vacuum applications. Tribolube-15RP is available with three different corrosion inhibitors designated by the letter RPA, RPB, & RPC. Please consult with an ALI lubrication engineer to select the correct one for your application. These greases are suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    These greases are especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required.

    Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.

    Applications

    Tribolube-15V is recommended for vacuum applications. Please consult with an ALI lubrication engineer to select the correct one for your application. These greases are suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    These greases are especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Each grease is suited for different operating environment temperatures. Tribolube-15 and Tribolube-15MS meet the requirements for MIL-PRF-27617 Types 4 & 5. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.

    Applications

    Tribolube-15V is recommended for vacuum applications. Tribolube-15RP is available with three different corrosion inhibitors designated by the letter RPA, RPB, & RPC. Please consult with an ALI lubrication engineer to select the correct one for your application. These greases are suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    Tribolube-16 is a wide temperature range grease especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Tribolube-16 meets the qualification requirements of MIL-PRF-27617G - Types 2 & 3. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.

    Applications

    This grease is suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    Tribolube-16S is a wide temperature range grease especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Tribolube-16S is available with three different corrosion inhibitors designated by the letters RPA, RPB, & RPC. Please consult with an ALI lubrication engineer to select the correct one for your application. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.

    Applications

    This grease is suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    Tribolube-19 is intended for use in systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Tribolube-19 meets the qualification requirements of MIL-PRF-27617F - Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions. Tribolube-19 is available with MoS2 using the designation of MS, or rust inhibitors using the following designation, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application.

    Applications

    These greases are suitable for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage

    Characteristics

    Tribolube-26N is a wide temperature range, extreme pressure, anti-wear, antirust, non-migrating grease. It has a low foreign and/or opaque particle count and a high resistance to micro wave energy. This grease is capable of performing at temperatures as high as 450 ºF for long durations. The base material for Tribolube-26N, Tribolube-2N meets the performance requirements of MIL-PRF-83261.

    Applications

    Aircraft actuators, gears, gimbal rings, oscillation bearings, antifriction and plain spherical bearings. It is especially suitable for use in applications using miniature bearings. Blower motors, motor generators, plastic clutches and gears, servo motors, microwave ovens, speedometer cables, motorcycle and automotive distributors, typewriters, business machines, etc. Other applications include subfractional horsepower gear motors, camera drive systems, microswitch assemblies, reduction gears, and scientific instruments. Tribolube-26N is suitable for use in edge board and twist lock connections, twist pins and other applications involving electrical contacts and connectors where very high engagement forces are prevalent.

  • noImage

    Characteristics

    Tribolube-26NMS maintains the same physical properties as Tribolube-2N which conforms to MIL-PRF-83261 and has a proven shelf life of over 10 years. An antitrust additive and MoS2 were added to enhance the already excellent extreme pressure and anti-wear properties of Tribolube-2N. Tribolube-26NMS displays excellent performance over a wide operating temperature range, has outstanding extreme pressure and anti-wear characteristics, has low foreign and opaque particle content, is non-migratory and highly resistant to microwave energy, and is generally compatible with plastic and elastomeric seals.

    Applications

    Aircraft actuators, gears, gimbal rings, oscillation bearings, anti-friction and plain spherical bearings. It is especially suitable for use in applications using miniature bearings. Reported applications include blower motors, motor generators, plastic clutches and gears, servo motors, microwave ovens, speedometer cables, motorcycle and automotive distributors, typewriters, business machines, etc. Other applications have included sub-fractional horsepower gear motors, camera drive systems, micro switch assemblies, reduction gears, and scientific instruments.

  • noImage

    Characteristics

    Tribolube-64 primary characteristic is that it has extremely low start run torques at -100 ºF, yet will operate at temperatures of 400 ºF for long periods of time. Tribolube-64 is nonreactive with strong acids, oxygen, fuels, and solvents. It is an excellent anti-wear, extreme pressure lubricant with long life. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain conditions. Tribolube-64 is available with EP agents using the designation of MS or SW, or rust inhibitors using the following designations, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application. (data shown below is for Tribolube- 64).

    Applications

    Tribolube-64 is intended for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.

  • noImage
  • noImage

    Characteristics

    Tribolube-64RPC primary characteristic is that it has extremely low start run torques at -100ºF, yet will operate at temperatures of 400ºF for a period of time. Tribolube-64RPC is non-reactive with strong acids, oxygen, fuels, and solvents. It is an excellent anti-wear, extreme pressure lubricant with long life. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain conditions.

    Applications

    Tribolube-64RPC is intended for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.