Characteristics

Tribolube-19 is intended for use in systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Tribolube-19 meets the qualification requirements of MIL-PRF-27617F - Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions. Tribolube-19 is available with MoS2 using the designation of MS, or rust inhibitors using the following designation, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application.

Applications

These greases are suitable for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.
Request a Sample
Unit of Measure
Items
noImage

Tribolube-19, 8 Oz. Tube
List Price QUOTE
noImage

Tribolube-19, 24-Oz Cartridge
List Price QUOTE
noImage

Tribolube-19, 1-Lb. Jar
List Price QUOTE
noImage

Tribolube-19, 5-Lb Can
List Price QUOTE
noImage

Tribolube-19, 10-Lb. Can (1 Gal)
List Price QUOTE
Temperature Range N/A -65 to 300 ºF
NLGI No. N/A 1
Description N/A Characteristics

Tribolube-19 is intended for use in systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Tribolube-19 meets the qualification requirements of MIL-PRF-27617F - Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions. Tribolube-19 is available with MoS2 using the designation of MS, or rust inhibitors using the following designation, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application.

Applications

These greases are suitable for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.
Low Temperature Torque
@-65 ºF. Starting
N/A 5,070 gm-cm
Low Temperature Torque
@-65 ºF. 60 min. Running
N/A 1,625 gm-cm