Tribolube 64
Defense, Aviation and Space
Characteristics
Tribolube-64 primary characteristic is that it has extremely low start run torques at -100 ºF, yet will operate at temperatures of 400 ºF for long periods of time. Tribolube-64 is nonreactive with strong acids, oxygen, fuels, and solvents. It is an excellent anti-wear, extreme pressure lubricant with long life. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain conditions. Tribolube-64 is available with EP agents using the designation of MS or SW, or rust inhibitors using the following designations, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application. (data shown below is for Tribolube- 64).
Applications
Tribolube-64 is intended for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.
Tribolube-64 primary characteristic is that it has extremely low start run torques at -100 ºF, yet will operate at temperatures of 400 ºF for long periods of time. Tribolube-64 is nonreactive with strong acids, oxygen, fuels, and solvents. It is an excellent anti-wear, extreme pressure lubricant with long life. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain conditions. Tribolube-64 is available with EP agents using the designation of MS or SW, or rust inhibitors using the following designations, RPA, RPB, RPC. Consult with an ALI lubrication specialist for the correct rust inhibitor for your application. (data shown below is for Tribolube- 64).
Applications
Tribolube-64 is intended for use in small and large diameter ball, roller, needle, and plain bearings, threads, valves, gears, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.
